At the same time as the box was built, in another room the computer was coming together.

Everything was assembled and tested before begining to install it all in the box.
Since I'm using a seperate sound card, I am going to have to anchor it to the back wall of the case.
However, the holes in the card are just a touch too small for the bolts I have. So no problem there, I'll just drill them out a tiny bit. 

Now that the bolts will fit, the motherboard (whose holes were fine) was bolted to the bottom of the box and the back wall is drilled out to mount the Audigy.

And it is bolted in place with phenolic spacers.

So now a quick test.....
|