|
    
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] | Wow, even though my office is in the basement it is hot down here! My case temps climbed back up well over 30C. Had to take the front bezel off to stay in the 28C zone. Well, we can't have that..... So once again I made an order with Millisec.com. Six more high speed 80mm Sunnons (42.5cfm) and a 120mm YS-Tech (131.5cfm). Four of the 80mms will replace the 2CoolPC Plus as intakes and the remaining two 80mms and the 120mm will be exhaust. Or that was the plan. I didn't have room for the two 80mm exhaust fans so saving them for a future project.
Tear machine down to bones again and out to garage we go. Brought a little help this time ;)
I sat and stared at my case for at least an hour (removing and replacing the cover) and decided that it will be necessary to cut the left side off for this mod. Besides, pulling that whole cover off was a PIA. This pic was taken about 2 minutes before I burned up my last cutting wheel and had to go to town to get more :(
Looks easier to work on already!
| ||||
